Anchors Unlimited, Inc.
P.O. Box 321
Verona, PA 15147 US
Phone: (412) 828-0130 • Fax: (412) 828-0149
E-Mail: Sales@AnchorsUnlimited.com Website: www.AnchorsUnlimited.com
All Categories > Power Actuated > Pins > Hammer Drive® Pins > View Items  

Hammer Drive® Pins

Check up to five results to perform an action.

Hammer Drive® pins are designed for permanently fastening a fixture to concrete and some types of masonry. This fastener is designed for use in a standard hand tool and should not be used in a powder actuated tool.
The pins are formed with a 1/4" diameter head on one end and a 0.140" diameter shank in various lengths. A 3/8" diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. This fastener is recommended for light duty static load applications where holding power is not a critical factor. It should not be used overhead.




  Results 1 - 8 of 8 1 

Item #

Item Name

Shank Length

Head Diameter

Shank Diameter

50294 1/4" Head Hammer Drive® Pin 3/4 in 1/4 in 0.140
50296 1/4" Head Hammer Drive® Pin 1 in 1/4 in 0.140
50298 1/4" Head Hammer Drive® Pin 1 1/4 in 1/4 in 0.140
50300 1/4" Head Hammer Drive® Pin 1 1/2 in 1/4 in 0.140
50302 1/4" Head Hammer Drive® Pin 2 in 1/4 in 0.140
50304 1/4" Head Hammer Drive® Pin 2 1/2 in 1/4 in 0.140
50306 1/4" Head Hammer Drive® Pin 3 in 1/4 in 0.140
50310 Standard - Hammer Drive® Setting Tool N/A N/A N/A
  Results 1 - 8 of 8 1 
Print Back