Item # 50298, 1/4" Head Hammer Drive® Pin On Anchors Unlimited, Inc.

		\| Shipping \| Tax \| Terms

Request for Quote	0 Items

All Categories > Power Actuated > Pins > Hammer Drive® Pins > Item # 50298


	Item # 50298, 1/4" Head Hammer Drive® Pin

larger image

Hammer Drive® pins are designed for permanently fastening a fixture to concrete and some types of masonry. This fastener is designed for use in a standard hand tool and should not be used in a powder actuated tool.
The pins are formed with a 1/4" diameter head on one end and a 0.140" diameter shank in various lengths. A 3/8" diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. This fastener is recommended for light duty static load applications where holding power is not a critical factor. It should not be used overhead.

Specifications

Shank Length		1 1/4 in

Head Diameter		1/4 in

Shank Diameter		0.140

Standard-Box		100

Standard-Carton		1000

Pin Applications (Suitable/Available)		Concrete Lightweight Concrete

Pin Applications (Job Site Test Recommend)		Solid Block (Grout Filled)

Powers Tools (Suitable/Available)		Hammer Drive Tool

Hammer Drive® Setting Tool



	50310 Standard - Hammer Drive® Setting Tool QUOTE

Item # 50298, 1/4" Head Hammer Drive® Pin

Shank Length

Head Diameter

Shank Diameter

Standard-Box

Standard-Carton

Pin Applications (Suitable/Available)

Pin Applications (Job Site Test Recommend)

Powers Tools (Suitable/Available)