Rebar Cutter Bits On Anchors Unlimited, Inc.


	Rebar Cutter Bits
	Check up to five results to perform an action.

larger image Rebar cutter bits provide a quick, easy method for drilling through mesh or reinforcing bars embedded in concrete when the drilled hole cannot be relocated. The bits are used in the rotation only mode and are designed to fit in a standard rotary drill motor with a 1/2" Jacobs style chuck. When drilling with a hammer drill or rotary hammer, a it is important to stop drilling immediately when a standard carbide bit contacts steel reinforcing bar or wire mesh, otherwise the bit will fail. If the drilled hole cannot be relocated, a rebar cutter bit is used to drill through the embedded steel. Insert the rebar cutter bit into the chuck of a standard 1/2" rotary drill. Place the bit into the partially drilled hole until is contacts the mesh or reinforcing bar. Drill through the embedded steel with the rebar cutter bit. Once the bit has drilled through the steel, remove the debris from the hole, then continue drilling with the standard carbide tipped bit using a hammer drill or rotary hammer.

Results Per Page :

Rebar Cutter Bits