Item # 50342, 3/8"-16 Threaded Studs On Anchors Unlimited, Inc.

		\| Shipping \| Tax \| Terms

Request for Quote	0 Items

All Categories > Power Actuated > Pins > Threaded Studs > Item # 50342


	Item # 50342, 3/8"-16 Threaded Studs

larger image

Threaded studs are available in 1/4"-20 and 3/8"-16 thread diameters with a variety of thread and shank lengths for use in concrete, some types of masonry, and A36 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required.
The shank diameter for the threaded stud is 0.145" for the 1/4"-20 diameter and 0.205" for the 3/8"-16 diameter. Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. On the 1/4"-20 threaded studs, a plastic cap is also provided to protect the threads of the fastener during the driving process.

Specifications

Thread Length		1 1/4 in

Shank Length		1 in

Thread Diameter		3/8 mm

Shank Diameter		0.205

Standard-Box		100

Standard-Carton		1000

Pin Applications (Suitable/Available)		ASTM A36 Structural Steel Concrete Lightweight Concrete

Pin Applications (Job Site Test Recommend)		Solid Block (Grout Filled)

Powers Tools (Suitable/Available)		Powers P3600 Powers P3801

ITW® Tools (Suitable/Available)		ITW Ramset® MD380

Hilti® Tools (Suitable/Available)		Hilti® DX600N Hilti® DX451 Hilti® DXA41

Item # 50342, 3/8"-16 Threaded Studs

Thread Length

Shank Length

Thread Diameter

Shank Diameter

Standard-Box

Standard-Carton

Pin Applications (Suitable/Available)

Pin Applications (Job Site Test Recommend)

Powers Tools (Suitable/Available)

ITW® Tools (Suitable/Available)

Hilti® Tools (Suitable/Available)