Search Online Catalog
GO
Wire Anchors
Mechanical Anchors
Wall Anchors
Specialty Masonry Wall Anchors
Specialty Construction Bolts
Roofing Fasteners
Waterjet Cutting
CNC Wire Shapes
Powder Actuated
Drill Bits
Gas Fastening
Adhesives & Foams
Machining & Fabrication
Online Catalog
Home
WIRE ANCHOR SPECIALISTS
For custom orders
Call 800-959-0882 or
send your inquiries to
Sales@AnchorsUnlimited.com
View RFQs  | Shipping 
 | Tax 
 | Terms
 Request for Quote 0 Items
All Categories > Power Actuated > Pins > Hammer Drive® Pins > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Hammer Drive® Pins

Check up to five results to perform an action.

Hammer Drive® pins are designed for permanently fastening a fixture to concrete and some types of masonry. This fastener is designed for use in a standard hand tool and should not be used in a powder actuated tool.
The pins are formed with a 1/4" diameter head on one end and a 0.140" diameter shank in various lengths. A 3/8" diameter steel washer is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation. This fastener is recommended for light duty static load applications where holding power is not a critical factor. It should not be used overhead.




Compare Items Request Quote
   
  Results 1 - 8 of 8 1 

Item #

Item Name

Shank Length

Head Diameter

Shank Diameter

Sort by
50310 Standard - Hammer Drive® Setting Tool N/A N/A N/A
50294 1/4" Head Hammer Drive® Pin 3/4 in 1/4 in 0.140
50296 1/4" Head Hammer Drive® Pin 1 in 1/4 in 0.140
50298 1/4" Head Hammer Drive® Pin 1 1/4 in 1/4 in 0.140
50300 1/4" Head Hammer Drive® Pin 1 1/2 in 1/4 in 0.140
50302 1/4" Head Hammer Drive® Pin 2 in 1/4 in 0.140
50304 1/4" Head Hammer Drive® Pin 2 1/2 in 1/4 in 0.140
50306 1/4" Head Hammer Drive® Pin 3 in 1/4 in 0.140
  Results 1 - 8 of 8 1