|
|
Item # 05005D, PE1000 Cartridges
|
|
|
|
|
|
The PE1000+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The PE1000+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete base and solid masonry materials.
One PE1000+ mixing nozzle is packaged with each cartridge.
PE1000+ mixing nozzles must be used to ensure complete and proper mixing of the adhesive.
|
|
|
|
|
|
|
|
- Bonding threaded rod and reinforcing bar into hardened concrete and grouted CMU
- Evaluated for installation and use in dry and water-saturated concrete including water-filled holes
- Suitable to resist loads in cracked or uncracked concrete base materials for cases where anchor design theory and criteria applies
- Can be installed in a wide range of base material temperatures
|
|
|
|
- Designed for use with threaded rod and reinforcing bar hardware elements
- Consistent performance in low and high strength concrete (2.500 to 8.500 psi)
- Evaluated and recognized for freeze/thaw performance
- Evaluated and recognized for long term and short term loading
- Evaluated and recognized for variable embedments
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Easy dispensing reduces applicator fatigue
|
|
|
|
International Code Council, Evaluation Service (ICC-ES) ESR-2583
Code compliant with the 2006IBC 2006 IRC. 2003IBC, 2003 IRC, 2000IBC, 2000 BC and 1997 UBC
Tested in accordance with AC308 for use in structural concrete according to AC1318 Appendix D
(Strength Design) and as amended by provisions of ICC-ES AC308 Annex A, Section 3.3
Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading
Compliant with NSF/ANSI Standard 61 for drinking water system components - health effects; minimum requirements for materials In contact with potable water and water treatment
Conforms to requirements of ASTM C 881; Types l ll. IV and v, Grade 3. Classes 8 & C (also meets type 111 except for elongation)
Department of Transportation listings
|
|
|
|
CSI Divisions: 03151-Concrete Anchoring, 04081-Masonry Anchorage and 05090-Metal Fastenings.
Adhesive anchoring system shall be PE10O0+ as supplied by Powers fasteners, Inc., Brewster, NY
Anchors shall be installed in accordance with published instructions and requirements of the Authority Having Jurisdiction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
